Installing on CentOS 8 and Red Hat Enterprise Linux 8¶
CentOS is a free, community-supported Linux distribution that is functionally compatible with its upstream source, Red Hat Enterprise Linux. For purposes of CollectiveAccess installation they are identical. The instructions provided here should work for either CentOS or Red Hat Enterprise Linux.
CollectiveAccess relies on a number of open-source software packages to run such as MySQL (database server), PHP (programming lanaguage) and Apache or nginx (web server), to name just a few. These required packages, all of which are standard parts of the CentOS distribution, can be installed using the dnf package manager.
To start bring up a command line terminal on your CentOS system. Many of the commands required for installation must be run as the root (administrative) user. You can either log in as the root user, or (preferably) run the commands using sudo, which executes commands as the root user for authorized users. We assume use of sudo and include it whenever it is required.
First we install a web server. These instructions assume use of Apache. You can also install nginx, a popular alternative to Apache if desired, although the web-server specific configuration will differ from that described here. To install Apache enter in the terminal:
sudo dnf -y install httpd
Next, set Apache to start itself automatically every time the server is rebooted:
sudo systemctl enable httpd
and also to start running now:
sudo systemctl start httpd
You should now be able to connect to the web server by going to the URL http://<ip address of your server> in a web browser. An Apache welcome page should display. If unsure of your server’s IP address, the hostname -I command will return it.
Next install PHP version 7.4 and required extensions. CentOS 8 offers only PHP 7.2 and 7.3. An external repository is required for installation of PHP 7.4. We’ll use the popular EPEL and REMI repositories to obtain the latest packages. To add the repositories:
sudo dnf -y install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm sudo dnf -y install https://rpms.remirepo.net/enterprise/remi-release-8.rpm
and then enable REMI:
sudo dnf config-manager --set-enabled remi sudo dnf -y module install php:remi-7.4
Now we can actually install PHP 7.4:
sudo dnf -y install php php-cli php-common php-gd php-curl php-mysqlnd php-zip php-fileinfo php-gmagick php-opcache php-process php-xml php-mbstring php-redis
Once the PHP installation process completes typing php -v in the terminal should return output similar to:
PHP 7.4.3 (cli) (built: Oct 6 2020 15:47:56) ( NTS ) Copyright (c) The PHP Group Zend Engine v3.4.0, Copyright (c) Zend Technologies with Zend OPcache v7.4.3, Copyright (c), by Zend Technologies
Note that PHP 8 is not yet supported.
The default installation of PHP is configured with memory and file upload size limits that are often too low for typical use of CollectiveAccess. In particular, file uploads are limited to a maximum of 2mb, which is well below the media file sizes most users work with. To raise these limits edit the PHP configuration file at /etc/php.ini.
With the php.ini file open search for memory_limit and change it to “256m”. If you are planning to upload very large media files (Eg. JPEGs > 10mb or TIFFs > 100mb) you may wish to set this value to “384m” or even “512m”.
The memory_limit setting caps the amount of memory CollectiveAccess can use. It does not actually allocate memory to PHP or CollectiveAccess. Usually CollectiveAccess will use much less memory than these limits, but media processing may require larger memory allocations for short periods.
Next search for upload_max_filesize and change it to a value larger than the largest file you expect to upload. If you’re planning to upload 500mb video files consider setting it to “750m” to provide a margin of safety. If you’re planning to upload multiple 40mb TIFF files consider setting it to some multiple of 40.
As with memory_limit this setting is a maximum. It does not actually allocate resources.
Finally, search for post_max_size and set it to a slightly larger value than upload_max_filesize. If upload_max_filesize is set to “750m”, for example, you may elect to set post_max_size to “800m”.
By default PHP will not display runtime errors on screen. If you’re experiencing blank white screens, odds are a PHP error occurred but it’s not being displayed. To enable on-screen error displays search for display_errors and set its value to “On”. On-screen PHP error display can be useful for debugging, but it is adviseable to leave message display off in a production system.
Once you’re done editing php.ini restart the web server, allowing your edits to take effect:
sudo systemctl restart httpd
You can also change the display_errors setting by adding the following PHP code to your setup.php file: ini_set(‘display_errors’, ‘On’);. Setting display_errors in setup.php does not require a web server restart, making it very convenient when debugging.
Now let’s install MySQL. CollectiveAccess works with version 5.7 or newer of MySQL, or equivalent versions of MariaDB. To install the most current version, version 8.0:
sudo dnf install -y mysql-server
Then set MySQL to start now and automatically whenever the server reboots:
sudo systemctl start mysqld sudo systemctl enable mysqld
Next we install various packages to support data caching and processing of media: ffmpeg (audio/video), Ghostscript (PDFs), GraphicsMagick (images), mediainfo (metadata extraction), ExifTool (metadata extraction), dcraw (RAW images), Poppler (content extraction from PDFs) and Redis (caching):
sudo dnf -y install ffmpeg ghostscript dcraw mediainfo poppler redis GraphicsMagick perl-Image-ExifTool
CentOS does not offer packages for LibreOffice, which is required to generate previews for Microsoft Word/Excel/PowerPoint files. If you need the functionality provided by this application you can install it manually using instructions provided on the LibreOffice web site.
Now we are ready to install the CollectiveAccess Providence back-end cataloguing application. The web server we installed earlier uses /var/www/html for documents by default (the “web server root” directory). We are going to place CollectiveAccess here, in a subdirectory named ca. The URL for this directory will be http://<your server ip>/ca.
You can use a different web server root directory for the application by editing /etc/httpd/conf/httpd.conf. Modify the line DocumentRoot /var/www/html to point to your chosen directory.
You may download a release from https://github.com/collectiveaccess/providence/releases, or install is with Git. Using a release in somewhat simpler to install, while using Git allows you to easily update files and switch to development versions of CollectiveAccess.
To install with Git, in the first make sure Git is installed:
dnf install -y git
Next change directory into the web server root directory.
Then “clone” the Providence application code from GitHub:
git clone https://github.com/collectiveaccess/providence.git ca
If you prefer to download a release, place the release ZIP or tgz file into /var/www/html and uncompress it. Then rename the resulting directory (named something like providence-1.7.11) to ca.
In the terminal change directory into the ca application directory and copy the setup.php-dist file to setup.php. This file contains basic configuration for Providence. The “-dist” version is simply a template. The setup.php copy will need to be customized for your installation:
cd /var/www/html/ca cp setup.php-dist setup.php
Edit setup.php, changing settings to suit. At a minimum you will need to edit the database login settings __CA_DB_USER__, __CA_DB_PASSWORD__, __CA_DB_DATABASE__. You may want to edit other settings, which are described by notes within setup.php. You should also edit the __CA_STACKTRACE_ON_EXCEPTION__ to be true. This will allow you to receive full error messages on screen if something goes wrong. You may also set __CA_CACHE_BACKEND__ to “Redis” to use the Redis memory-based cache system. Redis is faster and more reliable than the default file-based caching system, but requires Redis to be running on the server.
By default dnf installs the MySQL database server with an all-access, password-less administrative account named root. It’s generally insecure to leave this account password-less, but in a testing environment this may not matter. If you decide to use the root account, set __CA_DB_USER__ to “root”, leave __CA_DB_PASSWORD__ blank and set __CA_DB_DATABASE__ to the name you’ll use for your database. For this example, we’ll assume the database is to be named my_archive.
MySQL can support multiple databases in a single installation, so the my_archive database must be created explicitly. Log into mysql in the terminal using the mysql command (assuming you haven’t set a password for the root account):
For ephemeral systems intended for testing or evaluation, leaving the root login password-less and using that login for the CollectiveAccess application may be acceptable. For any other use you should secure your MySQL installation using the mysql_secure_installation command and set up an application-specific MySQL login with access restricted to the specific database used for CollectiveAccess. If you’ve secured your MySQL installation using mysql_secure_installation be sure you include the password you set for root in your mysql command: mysql -uroot -p<your password>.
One you’re logged in, at the mysql> prompt enter:
CREATE DATABASE my_archive;
To be sure your new database has been created run the SHOW DATABASES; command. Your new my_archive database should appear in the list of available databases.
If you wish to create a MySQL login specific to the newly created database, while still at the mysql> prompt enter these two commands:
CREATE USER my_user@localhost identified by 'my_password'; GRANT ALL on my_archive.* to my_user@localhost;
where my_user is your preferred MySQL user name and my_password is your preferred password for the MySQL login.
MySQL logins are specific to MySQL and have nothing to do with your server login. You can set the user name and password to whatever you want, independent of all other login credentials.
Go back to setup.php and enter your newly created MySQL login credentials into the __CA_DB_USER__, __CA_DB_PASSWORD__ and __CA_DB_DATABASE__ settings. The restart the web server with the command:
sudo systemctl restart httpd
Certain directories in the installation must be writeable by the web server, within which CA runs. On CentOS, the web server runs as user apache. Change the permissions on the app/tmp, app/log, media and vendor directories to be writeable by apache:
cd /var/www/html/ca sudo chown -R apache app/tmp app/log media vendor sudo chmod -R 755 app/tmp app/log media vendor
Navigate in a web browser to http://<your server ip>/ca. You should see this, or something similar:
Click on the installer link and you should see:
Select a profile, enter your email address and click on Begin installation. A profile is a preset template with record types, fields and other cataloguing settings that the installer uses to define a new working system. The standard profiles Providence ships with include implementations of widely used standards:
You can add your own profiles, or use profiles from other users by dropping profile files in the /var/www/html/ca/install/profiles/xml directory.
If you want to experiment with different profiles you may wish to set the __CA_ALLOW_INSTALLER_TO_OVERWRITE_EXISTING_INSTALLS__ option in setup.php. By default the installer will refuse to install over an existing installation. With __CA_ALLOW_INSTALLER_TO_OVERWRITE_EXISTING_INSTALLS__ set the installer will include an option to overwrite existing data. In a real system this is extremely dangerous – any one with access to the installer can delete the entire system – but is very handy for testing and evaluation.